Join date: Nov 21, 2022



 – 192.168.l00.1 is a private IP Address that is used as a default gateway address to login as admin to settings of router.‎Change WiFi Password · ‎Default Router Passwords · ‎ · ‎

This is the most common question; is the IP address you are using to log in for your wifi router correct or not? Here is some Right Vs Wrong Combination ...

The IP address provides you the admin access to your router and helps you make changes to your network settings. You can configure the default ...

As is a personal IPv4 network address, means that you can't attach to the user router or device from outside the local network similarly with the ...

192.168.100. 1, empty, empty. 192.168.l00.1 huawei, Huawei, 1234. ip:, 192.168.l00.1 huawei login, user. 192.168.100.q, admin, Password. – 192.168.l00.1 is the default IP address to login admin panel to change WiFi password, SSID, and router settings at

1.1) much more often than 192.168.100.x. Was this page helpful?

Yesterday i learned that when you bridge your Comcast gateway, you can no longer access it with but instead 192.168.100.

Question: The # nmap --script=ftp-brute \( 192.168 .100 .1 \) command attempts a brute-force attack to guess usernames and passwords on the FTP server on ...

<a href="" target="_blank">Check this Site:</a>. Copy to Clipboard.Log in to the administration page of the router (refer to question 1:How to use to log in to the ... IP First Three Bytes: 192.168.100.

However, it is set to have all connected devices have IP 192.168.100. ... You can follow the question or vote as helpful, but you cannot ...

It doesn't respond to addresses outside it subnet. What I think I need is NAT rules that use 192.168.100.x for and the public IP address for ... – 192.168.l00.1 is a private IP Address used as a default gateway address to log in as admin to router settings. It is assigned ...Huawei: root

Well the answer to question what is the difference between is simple that both of them are different IP addresses of a network.

Not the answer you're looking for? Browse other questions tagged. routing · subnet · networking. or ask your own question. ... Five Stack Exchange ... is a Private IP Address for use only inside of a Private Network. This address can be used by routers, modems, and other many devices. You are ...

That was not my question. bbearren wrote: Have you tried bypassing your router? Connect your PC Ethernet cable directly to Port 1 on the modem and try ... router login and password for your device at We will help you get into your router or other devices on your network ...

The IP address belongs to the private address space, and it's used by local network devices to identify themselves. Despite its strange appearance ...

Access Data for IP


Was this reply helpful?

Hi MichalRama,

How satisfied are you with this reply?

Open the Terminal in Linux or Ubuntu PC Type ipconfig and hit the Enter Button. Then Check for inet addr text and the IP address next to this text is your Router Default Login Page IP.

192.168.l00.1 huawei login

Save the settings also the router will reboot to direct the alterations.

Login modem panel http : //


How satisfied are you with this reply?

How satisfied are you with this reply?

Username – 192.168.l00.1 is the default IP address to login admin panel to change WiFi password, SSID, and router settings at Router companies such as TP-Link, NETGEAR, Huawei, IndiHome use this as their default gateway address. LoginHow to login to these steps to login to admin panel settings:Open your internet browser.Type or and press Enter.A login page of the router will appear.Enter the default username and password.Username: adminPassword: admin or password (List of Default Router Username and Passwords)You will now be successfully logged in.Note: Be careful when entering the IP address, most commonly 192.168.l00.1 is typed which is an invalid IP address. By typing 192.168.l00.1 in the address bar you will be redirected to the wrong location.

Getting Started with your Routers setup by logging in to the Admin Page with the default IP address is the first step. If you don’t know the correct IP address just check your Router Backside and let’s start.

You Never changed it? Try to find them in the list, otherwise to turn the router back to factory settings, you need to hold on the button for 10 seconds using a needle or toothpick then you will be able to find the defaults credentials for the list :)

15. DomainService - Entries (SSHFP Check is new - 2022-09-24, may be incomplete, alpha, some results are required)

Do you really want to support this project? Donate: Check-your-website, IBAN DE98 1001 0010 0575 2211 07, SWIFT/BIC PBNKDEFF, Euro

Username and Password List

Connect to Your Router Using Its Credentials

If I helped you anyway, It makes me happy.

A router login page will appear, asking you to enter the username and password to log in.

Others IP Address:

Sorry this didn't help.


Ultimately, the admin web page of is open now to use. Now you may begin to configure your gadgets.

Thanks for your feedback, it helps us improve the site.

How satisfied are you with this reply?

Here, you will have to fill the default username and password. If you've set up a different username and password in the past, you can fill that in. Otherwise, once you've logged in with the default credentials, you must change it afterward. This step will increase the security on your network, making sure that no one else can log on to it. 

Thanks for your feedback.

Find IP Address on Windows PC:

11. Html-Content - Entries

16. Cipher Suites

Find Your Router IP Address

No NameServer - IP address - Informations found

On your PC system open a web browser. We suggest you use the newest edition of the web browser.

How to login Easily


Open a web browser on a PC connected to the TP-Link Router.Head over to The login page for TP-Link Routers.Login to your TP-Link Router using the default login credentials.Once logged in, go to Wireless > Wireless Settings.Enter the new Wi-Fi SSID in the Wireless Network Name field and click on Save to save changes.Go to Wireless > Wireless Security.Enter the new Wi-Fi Password in the Password field under WPA/WPA2 Encryption section.Click on Save to save the changes.The Wi-Fi SSID and Password for the TP-Link router would be successfully changed.



More actions